MAKITA LS1219LX05
240v Slide mitre saw - 305mm blade
- 1800 Watt
- No load speed: 3200rpm
- Depth of cut: 102mm
- Laser for quick and accurate cutting
- Leg stand DEAWST05
- 1800 Watt
- No load speed: 3200rpm
- Depth of cut: 102mm
- Laser for quick and accurate cutting
- Leg stand DEAWST05
- 1800 Watt
- No load speed: 3200rpm
- Depth of cut: 102mm
- Laser for quick and accurate cutting
- Leg stand DEAWST05
LS1219LX05
The LS1219LX05 is a 305 mm corded slide compound mitre saw from Makita, supplied with a mitre saw stand. It features a powerful motor, rail-forward design, and built-in laser guide for precise, high-capacity cutting.
Key Features:
• Power: 1800 Watts
• Laser Guide: Built-in for accurate cut line alignment
• Cutting Capacity at 90°: 92 x 382 mm
• Cutting Capacity at 45°: 107 x 255 mm or 92 x 268 mm
• Bevel Range: 48° left / 48° right
• Mitre Range: 60° left / 60° right with positive stops
• Rail-Forward Design: Allows placement close to walls for space efficiency
• Soft Start & Constant Speed Control: Ensures smooth operation and consistent results
• Electric Brake: Enhances safety and productivity
• Large Turn Base & Front Bevel Lock: Improves stability and ease of adjustment
• Dust Extraction Ports: Dual 35/40 mm outlets for efficient collection
• Supplied With: 305 mm TCT blade (30 mm bore), dust bag, vertical vice, hex wrench, triangular rule, and mitre saw stand
Technical Specifications:
• Voltage: 240V
• No-Load Speed: 3200 rpm
• Blade Diameter: 305 mm
• Blade Bore: 30 mm
• Max Mitre Capacity: 60° left / 60° right
• Max Bevel Capacity: 48° left / 48° right
• Weight (saw only): 29.5 kg
• Weight (with stand): approx. 37.5 kg
• Dimensions (L x W x H): 898 x 664 x 725 mm
• Cable Length: 2.5 m
• Sound Pressure Level: 91 dB(A)
• Sound Power Level: 100 dB(A)
• Vibration Level (cutting wood): ≤ 2.5 m/s²
Alternative: LS1219L (240V)
Same saw in a 240V version — ideal for workshop use where a transformer isn’t required.
An introduction to mitre saws: A mitre saw is a portable machine for making cross or, by rotating the tool's turntable, angle (known as mitre) cuts in wood. Mitre saws are used both in workshops & by onsite carpenters for window casings, architraving, door frames, picture frames etc. The wood is taken to the mitre saw rather than the machine being taken to the material as in a circular saw. The majority are mains powered but cordless versions do exist. Click here to see all our saws
To choose between mitre saws: The key criteria needed for choosing a mitre saw is the diameter of the blade to determine the width & depth of cut. Mitre saws with this 305mm diameter blade are the largest available. Click here to see all our mitre saws
To make sure you've got the right mitre saw - 305mm blade: Choosing your power source: 240v tools are used with normal mains power whilst 110v tools are used on construction sites for safety reasons.
Click here to see all our mitre saw - 305mm blade
305mm Slide Compound Mitre Saw. Motor head slides on fixed pipes without extending to the rear of the machine, allowing the machine to be placed close to the wall.
LS1219L features laser marker
- Built in laser guide.
- Motor head slides on fixed pipes without extending machine at rear end, so the machine can be placed close to wall.
- Front knob for easy bevel adjustment
- Holders to support a wide workpiece
- Easy-to-operate mitre angle lock
- One-touch sliding lock
- Large turn base
- Connects to dust extractor
- Electric brake
- Soft start
- Constant speed control
- Double Insulation
- Blade Diameter: 305 mm
- Max mitre cut at 90º: 92#-#382 mm
- Max mitre range: 60#-#60 º
- Bore Diameter: 30 mm
- Vibration K factor: 1.5 m/sec²
- Noise K factor: 3 dB(A)
- Noise sound pressure: 91 dB(A)
- Input Wattage 110v: 1450 w
- No Load Speed: 3200#-# rpm
- Noise sound power: 100 dB(A)
- Max bevel range: 48#-#48 º
- Net weight: 29.5 kg
- Input Wattage 240v: 1800 w
- Vibration no load: 2.5 m/sec²
- 1 year warranty can be extended to 3 years by registering the tool online within 30 days of purchase, subject to the following conditions:
- the tool is CE marked and was purchased on or after 1st July 2012
- the tool is not an Air Compressor/ Air Tool, a Battery/ Charger, an Accessory, or a Petrol or Production Tool - To register your tool for extended warranty click here
- Warranty claims: Please request a collection from Makita using their returns form. Alternatively, you can speed the process up by taking the tool to your nearest approved Makita Area Service Agent. You can find your nearest agent here. When searching for your nearest agent on the website you will need to select the 'Service - Electric' tick box for a power tool warranty claim, or the 'Service - Garden Machinery' tick box for a garden tool warranty claim. Please contact Howe Tools should you need any assistance.
- You can order until 8pm for free next working day delivery to nearly all of England and Wales. For locations further from our hub, our cut off is 5pm. Some harder-to-reach locations may take an extra day. More info »
- For most orders we use a premium carrier that notifies you of a one hour timed delivery slot and sends text updates.
- If you change your mind within 30 days of buying a tool, no problem. Provided the tool has not been used and is in its original packaging, please email us at [email protected] quoting your order number, and we'll reply with your return options.
- If the tool is faulty within 30 days of buying it, we will arrange for its collection at no cost to you and supply a replacement.
- If the tool is faulty after 30 days of buying it, and before the expiry of the manufacturer’s warranty, we will guide you through the manufacturer’s warranty process.
