MAKITA GA4034
110v Angle grinder - 4" (100mm)
- 720 Watt
- No load speed: 11000rpm
- Paddle switch
- 720 Watt
- No load speed: 11000rpm
- Paddle switch
- 720 Watt
- No load speed: 11000rpm
- Paddle switch
GA4034
The GA4034 is a compact 100 mm corded angle grinder from Makita, designed for light-duty cutting and grinding with a slim, ergonomic profile and paddle switch control.
Key Features:
• Power Input: 720 W
• Disc Diameter: 100 mm
• No-Load Speed: 11,000 rpm
• Spindle Thread: M10 x 1.5 mm
• Paddle Switch (No Lock-On): Enhances safety with immediate shut-off
• Labyrinth Construction: Seals motor and bearings from dust and debris
• Double Insulation: For added electrical safety
• Compact Design: 265 mm length and 1.8 kg weight (without cable)
• Supplied With: Grinding wheel, side handle, wheel guard, and wrench
Technical Specifications:
• Bore Size: 16 mm
• Max Wheel Thickness: 6.4 mm
• Sound Pressure Level: 89 dB(A)
• Sound Power Level: 97 dB(A)
• Vibration Level (Surface Grinding): 7.5 m/s²
• Vibration Level (Disc Sanding): ≤ 2.5 m/s²
• Cable Length: 2.5 m
Alternative: GA4534
A similar model with a 115 mm disc for slightly more cutting depth, while retaining the same paddle switch and compact form factor.
An introduction to angle grinders: Angle grinders have a wide variety of uses amongst, for example, engineers, stone masons, welders, bricklayers & scaffolders. The grinding disc is mounted on a head which sits at right angles to the motor's drive shaft. They are occasionally referred to as disc or side grinders. Cordless angle grinders are concentrated at the smaller disc diameter end of this range. Click here to see all our grinders
To choose between angle grinders: Disc diameter is the key choice to make when selecting an angle grinder. They range in disc diameter size from 4' (100mm) - 9' (230mm) with the 4.1/2' (115mm) & 9' (230mm) grinders being the most popular choices. Smaller grinders rotate the discs at a higher speed. These tools all have a 4' disc diameter. Click here to see all our angle grinders
To make sure you've got the right angle grinder - 4' (100mm): Choosing your power source: 240v tools are used with normal mains power whilst 110v tools are used on construction sites for safety reasons.
Click here to see all our angle grinder - 4' (100mm)
Small diameter Angle grinders with ergonomically best possible barrel grip. Easy to operate paddle switch by hand gripping motor housing.
- Easy-to-operate paddle type on/off switch.
- Vibration: Artificial Wheel: 7.5 m/sec²
- Net weight: 1.77 - 2.06 kg
- Max Wheel Diameter: 100 mm
- Wattage: 720 w
- No Load Speed: 11000 rpm
- Spindle Size: M10x1.5mm
- Vibration K factor: 1.5 m/sec²
- Bore Diameter: 16 mm
- 1 year warranty can be extended to 3 years by registering the tool online within 30 days of purchase, subject to the following conditions:
- the tool is CE marked and was purchased on or after 1st July 2012
- the tool is not an Air Compressor/ Air Tool, a Battery/ Charger, an Accessory, or a Petrol or Production Tool - To register your tool for extended warranty click here
- Warranty claims: Please request a collection from Makita using their returns form. Alternatively, you can speed the process up by taking the tool to your nearest approved Makita Area Service Agent. You can find your nearest agent here. When searching for your nearest agent on the website you will need to select the 'Service - Electric' tick box for a power tool warranty claim, or the 'Service - Garden Machinery' tick box for a garden tool warranty claim. Please contact Howe Tools should you need any assistance.
- You can order until 8pm for free next working day delivery to nearly all of England and Wales. For locations further from our hub, our cut off is 5pm. Some harder-to-reach locations may take an extra day. More info »
- For most orders we use a premium carrier that notifies you of a one hour timed delivery slot and sends text updates.
- If you change your mind within 30 days of buying a tool, not a problem (assuming the tool has not been used and is in its original packaging) - call us on 0333 004 3000 or email us at [email protected] and we’ll contact you to arrange collection. Once the tool is received back, we will refund the cost of the tool less a £6 collection charge.
- If the tool is faulty within 30 days of buying it, we will arrange for its collection at no cost to you and supply a replacement.
- If the tool is faulty after 30 days of buying it, and before the expiry of the manufacturer’s warranty, we will guide you through the manufacturer’s warranty process.
- Recently Viewed
-
- Related ProductsCheck items to add to the cart or
