METABO SBE850-2
240v Percussion drill - 13mm keyless chuck
- 850 Watt
- 2 speed / variable / reversing
- Max in concrete: 20mm
- Carry case
- 850 Watt
- 2 speed / variable / reversing
- Max in concrete: 20mm
- Carry case
- 850 Watt
- 2 speed / variable / reversing
- Max in concrete: 20mm
- Carry case
SBE 850-2
Metabo 850 watt corded two-speed impact drill. Supplied in metaBOX 145 L. Designed for versatile drilling in masonry, concrete, steel, and timber.
Key Features
• Power: 850 watts
• Motor: Metabo Marathon motor with dust protection for extended service life
• Torque: 36 Nm (soft) / 14 Nm (hard)
• Speed Control: Vario (V)-Electronics with thumbwheel preselection
• Gearing: 2-speed gearbox with forward/reverse rotation
• Chuck: Keyless chuck with spindle lock and hex recess for direct bit use
• Safety: Metabo S-automatic mechanical clutch prevents tool lock-up
• Housing: Die-cast aluminium gear casing for heat dissipation
• Cable: Ball-jointed cable mount for unrestricted movement
Technical Specifications
• Power Input: 850 watts
• Output Power: 490 watts
• No-Load Speed: 0–1100 / 0–3100 rpm
• Impact Rate: 58,900 bpm
• Drilling Capacity:
– Masonry: 20 mm
– Concrete: 18 mm
– Steel: 13 mm
– Soft Wood: 40 mm
• Chuck Capacity: 1.5–13 mm
• Weight: 2.6 kg
• Noise Level: 103 dB(A) (K = 3 dB)
• Vibration (Metal Drilling): 6.5 m/s² (K = 1.5 m/s²)
• Warranty: 3 years with registration
Alternative
SBEV 1000-2 — same form factor with higher power (1000 watts) and electronic torque control for demanding applications
An introduction to percussion drills: A percussion drill has a hammer action and drill driver function enabling drilling into concrete and brick as well as wood, metal or plastics. Percussion drills are mains powered; combi drills are their cordless equivalent. Percussion drills are sometimes known as impact drills. A percussion drill differs from a hammer in that it does not have an SDS tool holder. Click here to see all our drills
To choose between percussion drills: The key consideration when choosing a percussion drill is the maximum drilling diameter required. 13mm refers to maximum drilling diameter in concrete & brick. You can use a larger drill bit for metal, plastic & wood (& some machines allow this in concrete & brick too) providing it has a 13mm or smaller diameter shank to fit the chuck. A keyless chuck is tightened by hand. Click here to see all our percussion drills
To make sure you've got the right percussion drill - 13mm keyless chuck: There is often a choice between single or 2 speed gears. Most percussion drills have a variable speed function. Click here to see all our percussion drill - 13mm keyless chuck
- Vario (V)-Electronics for working at customised speeds to suit various application materials.
- Thumbwheel for Speed Preselection.
- Robust die cast aluminium gear housing for optimum heat dissipation and long service life.
- Rotating carbon brush bridge for maximum performance even in anti-clockwise operation, e.g. for the removal of stubborn screws.
- Metabo Marathon-motor with dust protection for long service life.
- Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the tool stop unexpectedly.
- Forward and reverse rotation.
- Spindle with hexagonal recess for screwdriver bits for working without chuck.
- Cable-protecting ball joint for optimal freedom of motion when working.
Characteristics
- Rated input power 850 W.
- Output power 490 W.
- Maximum torque 36 / 14 Nm.
- Drill- masonry 20 mm.
- Drill- concrete 18 mm.
- Drill steel 13 / 8 mm.
- Drill- soft wood 40 / 25 mm.
- No-load speed 0 - 1100 / 0 - 3100 rpm.
- Revolutions at rated load 640 / 1800 rpm.
- Maximum impact rate 58900 bpm.
- Gears 2.
- Chuck capacity 1.5 - 13 mm.
- Collar diameter 43 mm.
- Drill spindle with hexagonal recess 6.35 mm.
- Drill spindle thread 1/2 " - 20 UNF.
- Chuck clamping type Quick-action Keyless Chuck.
- Weight (without power cable) 2.6 kg.
Vibration
- Drilling in metal 4.2 m/s².
- Uncertainty of measurement K 1.5 m/s².
- Impact drilling concrete 17 m/s².
- Uncertainty of measurement K 1.5 m/s².
Noise emission
- Sound pressure level 103 dB(A).
- Sound power level (LwA) 114 dB(A).
- Uncertainty of measurement K 3 dB(A).
- 1 and 3 year warranty link: https://www.metabo.com/uk/en/info/service/declaration-of-warranty/
- Warranty claims: Call us on 0333 004 3000 and we will arrange for the product to be returned to Metabo for inspection.
- You can order until 8pm for free next working day delivery to nearly all of England and Wales. For locations further from our hub, our cut off is 5pm. Some harder-to-reach locations may take an extra day. More info »
- For most orders we use a premium carrier that notifies you of a one hour timed delivery slot and sends text updates.
- If you change your mind within 30 days of buying a tool, not a problem (assuming the tool has not been used and is in its original packaging) - call us on 0333 004 3000 or email us at [email protected] and we’ll contact you to arrange collection. Once the tool is received back, we will refund the cost of the tool less a £6 collection charge.
- If the tool is faulty within 30 days of buying it, we will arrange for its collection at no cost to you and supply a replacement.
- If the tool is faulty after 30 days of buying it, and before the expiry of the manufacturer’s warranty, we will guide you through the manufacturer’s warranty process.
- Recently Viewed
-
- Related ProductsCheck items to add to the cart or
