DEWALT DCH253M2

DeWalt DCH253M2 (18V XR SDS‑Plus Rotary Hammer – 2×4.0Ah Kit)

The DeWalt DCH253M2 is an 18V XR SDS‑Plus rotary hammer supplied with 2× 4.0Ah XR batteries, charger and kitbox. It delivers 2.1 J impact energy, best‑in‑class low vibration at 6.6 m/s², and features rotation‑stop and impact‑stop modes for drilling, hammer drilling and light chiselling. Compact, lightweight and part of the Perform & Protect range, it is ideal for concrete, masonry and construction fixings.

Key Features:

• Battery System: 18V XR (includes 2× 4.0Ah batteries)
• Impact Energy: 2.1 J for efficient drilling in concrete and masonry
• Impact Rate: Up to 4500 bpm (Perform & Protect spec)
• No‑Load Speed: Up to 1550 rpm (XR motor performance)
• Low Vibration: 6.6 m/s² – reduces fatigue and increases runtime periods
• 3‑Mode Operation:
– Rotation only (wood/metal)
– Hammer drilling (concrete/masonry)
– Rotation stop for light chiselling (plaster, tiles, render)
• LED Work Light: Bright white LED with delay for improved visibility
• Mechanical Safety Clutch: Protects user and gearbox if bit binds
• All‑Metal Gearbox: Durable transmission for long service life
• Variable Speed & Reverse: Intelligent trigger for precise control
• Compact & Lightweight: Designed for overhead and confined‑space drilling
• Heavy‑Duty Kitbox: Included for transport and protection

Technical Specifications:

• Voltage: 18V XR
• Battery Capacity: 4.0Ah (×2 included)
• Impact Energy: 2.1 J
• No‑Load Speed: 0–1550 rpm
• Impact Rate: 0–4500 bpm
• Concrete Drilling Capacity: Up to 26 mm
• Wood Drilling Capacity: Up to 26 mm
• Metal Drilling Capacity: Up to 13 mm
• Tool Length: 301 mm
• Weight: 2.5 kg (tool only)

Included Accessories:

• 2× 4.0Ah XR Li‑Ion batteries with charge indicators
• XR multi‑voltage charger
• Multi‑position side handle
• Heavy‑duty kitbox

Alternative: DeWalt DCH273P2

Brushless XR SDS‑Plus rotary hammer with higher efficiency and improved runtime.

An introduction to hammers: Hammers combine a pulsing pressure action, or 'hammer blow', with the rotating of a bit to break through denser materials. The SDS system was originally invented in 1975 by Bosch and translates as 'insert, twist, fits'. The slots on SDS bits enable the back-and-forth hammer blow action whilst still rotating. The drill bit is locked but at the same time can rotate. This system transfers the energy that the hammer builds up internally through to the tip of the drill bit without damaging the chuck. Click here to see all our hammers & breakers

To choose between hammers: There are two considerations when choosing between hammers. Firstly; whether you require the two standard functions of a rotary action (ie drilling) & a rotary hammer action or the 3 functions of drilling, rotary hammer action & hammer only action. Secondly, whether you require the smaller SDS plus shank size drill bit or the larger SDS max shank size. These tools use smaller SDS plus shank size drill /chisel bits and have a lever that selects between 3 functions of drill, rotary hammer & hammer only action. Click here to see all our hammers

To make sure you've got the right 3 function hammer - sds plus: Click here to see all our 3 function hammer - sds plus