BOSCH GWS 13-125 CI

The BOSCH GWS 13-125 CI 240v Angle grinder - 5" (125mm) has the following features:

• 1300 Watt
• Single speed
• Anti vibration
• Anti kick back
• Carry case

An introduction to angle grinders: Angle grinders have a wide variety of uses amongst, for example, engineers, stone masons, welders, bricklayers & scaffolders. The grinding disc is mounted on a head which sits at right angles to the motor's drive shaft. They are occasionally referred to as disc or side grinders. Cordless angle grinders are concentrated at the smaller disc diameter end of this range. Click here to see all our grinders

To choose between angle grinders: Disc diameter is the key choice to make when selecting an angle grinder. They range in disc diameter size from 4" (100mm) - 9" (230mm) with the 4.1/2" (115mm) & 9" (230mm) grinders being the most popular choices. Smaller grinders rotate the discs at a higher speed. These tools all have a 5" disc diameter. Click here to see all our angle grinders

To make sure you've got the right angle grinder - 5" (125mm): Choosing your power source: 240v tools are used with normal mains power whilst 110v tools are used on construction sites for safety reasons.

Click here to see all our angle grinder - 5" (125mm)

Bosch GWS 12-125 CI Professional 230 V Small angle grinder - High productivity and the best user protection

Fast work rate due to powerful 1300 watt motor with Constant Electronic
Long lifetime due to motors with direct motor cooling, overload protection and long carbon brush lifetime
Leading user protection due to KickBack Stop, restart protection, anti-rotation protective guard and vibration reduction

Optimised air flow and improved protection against dust
Good handling thanks to slim housing
Vibration Control auxiliary handle with 40% vibration reduction for low user fatigue (EN 60745)
Soft start and starting current limitation
Gear head can be rotated in 90° steps
Handle can be used on right or left
Large spindle lock button for easy and fast accessory changes

Bosch GWS 12-125 CI Professional 230 V Small angle grinder - High productivity and the best user protection

Rated power input: 1.300 W
No-load speed: 11.500 rpm
Power output: 700 W
Grinding spindle thread: M 14
Disc diameter: 125 mm
Rubber backing pad, diameter: 125 mm
Wire cup brush, diameter: 75 mm
Length: 297 mm
Height: 103 mm
Weight: 2,3 kg
Starting current limitation
Champion motor
Constant Electronic
Direct cooling
KickBack Stop
Smooth start
Locking system
Overload protection
Distortion-resistant protective guard
Restart protection

Manufacturer's warranty

Bosch Blue - Professional

• 1 year warranty can be extended to 3 years (2 years for Batteries/Chargers) by registering the tool online within 30 days of purchase. For full information click here
• To register your tool for extended warranty click here
• Warranty claims: Call Bosch direct to arrange warranty repair Tel: 0344 736 0109 or use the online collection service

Bosch Garden Tools

• 2 year warranty - for full information click here
• Warranty claims: Call Bosch direct to arrange warranty repair Tel: 0344 736 0109 or use the online collection service

Bosch Green - DIY

• 2 year warranty - for full information click here
• Warranty claims: Call Bosch direct to arrange warranty repair Tel: 0344 736 0109 or use the online collection service

Delivery info

• Order by 5pm for free next working day delivery. There are additional delivery options on the one page check out including timed morning and weekend deliveries
• We use a premium carrier that notifies you of a one hour timed delivery slot and sends text updates
• In a very limited number of UK locations (Scottish Islands, Scottish Highlands, Isle of Man, Channel Isles, Scilly Isles), we will try our hardest, but the delivery service is likely to be an extra day - it’s still free though!

Returns info

• If you change your mind within 30 days of buying a tool, not a problem (assuming the tool has not been used and is in its original packaging) - call us on 0333 004 3000 or email us at [email protected] and we’ll contact you to arrange collection. Once the tool is received back, we will refund the cost of the tool less a £6 collection charge.
• If the tool is faulty within 30 days of buying it, we will arrange for its collection at no cost to you and supply a replacement.
• If the tool is faulty after 30 days of buying it, and before the expiry of the manufacturer’s warranty, we will guide you through the manufacturer’s warranty process.